Telecommunication

Model No. ITAS 2 - 472
Complete range of Base Station Antenna for perfect coverage
Product Specification
  • Port MIMO 4X4 LTE 2300 ¡V 2690 Cross Polarized Antenna
  • Variable Electrical Tilt.
  • Frequency Range - 2300 - 2400 and 2490 -2690 (MHz).
  • Horizontal Beam width - 65 ¢X
  • Gain ¡V 17 dB
  • Weight ¡V 16 Kg
  • Wind Speed ¡V 200 KM/H.
  • Height - 1.25 Meter.
Model No. ITAS 4 - 610

Product Specification
  • Port - 4X4 MIMO Ultra Slim Antenna.
  • High Broadband Cross Polarized Antenna.
  • Frequency Range - 790-960/1710-2170/1710-2170/2490-2690
  • Horizontal Beam width - 65 ¢X
  • Gain ¡V 17 dB
  • Weight ¡V 36 Kg
  • Wind Speed ¡V 200 KM/H.
  • Height - 2.70 Meter.
Model No. ITAS 2 - 466

Product Specification
  • Port Antenna.
  • Cross Polarized with independent VET Antenna.
  • Frequency Range - Dual band - 2300 - 2400
  • Horizontal Beam width - 65 °
  • Gain – 17 dB
  • Weight – 10 Kg
  • Wind Speed – 200 KM/H.
  • Height - 1.25 Meter.
Model No. ITAS 2 – 467

Product Specification
  • Port Antenna.
  • Cross Polarized with independent VET Antenna.
  • Frequency Range - Dual band - 2300 - 2400
  • Horizontal Beam width - 32 °
  • Gain – 21 dB
  • Weight – 10 Kg
  • Wind Speed – 200 KM/H.
  • Height - 1.25 Meter.
Model No. ITAS 2 – 468

Product Specification
  • Port Antenna.
  • Cross Polarized with independent VET Antenna.
  • Frequency Range - Dual band - 2300 - 2400
  • Horizontal Beam width - 65 °
  • Gain – 15 dB
  • Weight – 5 Kg
  • Wind Speed – 200 KM/H.
  • Height - 0.75 Meter.
Remote Electrical Tilt Unit for Base Station Antenna

Product Specification
  • RET Module for Dual and Tri Band Antenna
  • AISG 1.1 / AISG 2.0 Compliant
  • Easily attached without dismounting.
  • RET Module can be Daisy Chained.
  • Weight – 1.5 KG.
Microwave Antenna
Complete solution of Microwave Antenna of various Frequency range
Product Specification
  • Ultra High Performance Low Profile Antenna.
  • Ultra high Performance Low Profile Antenna, dual Integrated.
Various Size range – 0.2 m, 0.3 m, 0.6 m, 0.9 m, 1.2 m, 1.8 m, 2.4 m and 3.0 m.
Various Frequency Range –
5.925~7.125 GHz
7.125~8.5 GHz
10.125~11.7 GHz
12.75~13.25 GHz
14.4~15.35 GHz
21.2~23.6 GHz
24.25~26.5 GHz
27.5~29.5 GHz
40.5~43.5 GHz
Dual Polarized Orthomode Transducer (OMT)
To combine or to separate two orthogonally polarized microwave signal paths.
Product Specification
  • Operating Temperature - -45℃~60℃.
  • Degree of Protection – IP 65.
  • Compliance – Comply RoHS, 2002/96/EC.
  • Wind Velocity Survival Rating – 240 km/h
Dual Polarized Coupler

Product Specification
  • Frequency Band (GHz)
7.125-8.5, 10.125-11.7, 10.7-11.7, 12.7-13.3, 14.4-15.4, 17.7-19.7, 21.2-23.6, 24.2-26.5, 27.5-
29.5, 31.8-33.4 and 37.0-40.0.
  • VSWR – 1.3 and 1.4.
  • Coupling (dB) - 6.8±0.5 and 7.0±0.5.
  • Insertion Loss (dB) - 2.0±0.3, 2.2±0.3 and 2.4±0.3.
  • RoHS 2002/95/ES Complied.
Indoor Coverage Antenna
Best solution for indoor coverage
Product Specification
  • Frequency Range – 800 – 960 MHz, 1710 – 2500 MHz.
  • Input Impedance – 50 Ω.
  • Gain - 2±0.5/5±1dBi, 5±0.5/7±1 dBi,
  • Polarization type - Vertical polarization.
  • Power – 50 Watts.
  • Radome Material - UV Protected ABS
  • Working Temperature:-40℃~+60℃
Indoor ceiling mount MIMO antenna

Product Specification
  • Frequency Range - 698~800, 800~960, 1710~2700 and 1710~2700.
  • Polarization type – vertical and horizontal.
  • Input Impedance – 50 Ω.
  • Power – 50 Watts.
  • Working Temperature:-40℃~+60℃
  • Radome Material - UV Protected ABS
  • Gain - 2±1dBi, 3±1.5 dBi,
Panel Antenna

Product Specification
Frequency Range - 806~960/1710~2700.
VSWR – ≤ 1.5.
Gain - 6±1/8±1
Power – 50 Watts.
Dimension (mm) - 280×175×62.
Working Temperature:-40℃~+60℃
Material - ABS.
Rated Wind Velocity(km/h) – 210 KM/h
Parabolic Antenna – Model No. TDJ-5800P12B

Product Specification
  • Application - 5.8 GHz WMAN System and Wireless Bridge.
  • Supports IEEE802.11.a
  • Point to Point System.
  • Aluminum Die Cast Reflector.
  • Compatible with Vertical and Horizontal Polarization.
  • Frequency Range – 5728 to 5850 MHz
  • Gain – 34.5 dBi.
  • VSWR – 1.5
  • Max. Power – 100 Watts
Indoor Ceiling Antenna, Model No. TQJ-2400XTG

Product Specification
  • 2.4 GHz ISM Band.
  • 802.11 b,g.
  • WLAN / Bluetooth.
  • Indoor Coverage.
  • Frequency – 2400 – 2483 MHz.
  • Gain – 3 dBi.
  • Max. Power – 50 Watts
2.4 GHz Fiberglass Omni Antenna, Model no. – TQJ-2400AT.

Product Specification
  • 2.4 GHz Wireless LAN.
  • Public Wireless Hotspot.
  • Multi Point Applications.
  • Heavy duty steel mounting brackets.
  • Frequency Range – 2400 to 2483 MHz.
  • Gain – 12 dBi.
  • VSWR – 1.5
  • Max. Power – 100 Watts
5 GHz Broad Band Terminal Antenna

Product Specification
  • Used for 5 GHz UNII/ISM Band.
  • Used for 5 GHz Wireless LAN Systems.
  • Used for 5 GHz Wireless Access Systems.
  • Frequency Range – 5150 to 5850 MHz.
  • Gain – 5 dBi.
  • Polarization – Vertical.
  • Max. Power – 20 Watts
4.9 GHz Square Grid Parabolic Antenna

Product Specification
  • 4.9 GHz Wireless Access.
  • Suitable for long distance communications.
  • Point to point communication.
  • Wireless bridge.
  • Vertical and Horizontal Polarization.
  • Frequency Range – 4900 to 5000 MHz.
Mobile Antenna, Model No. TQC – 5500CE.

Product Specification
  • Good Appearance.
  • Small Size and Easy to Mount.
  • Gain – 5 dBi.
  • Polarization – Vertical.
  • Max. Power – 50 Watts
5.8 GHz Wall Mount Antenna, Model No. TDJ-5158BKE

Product Specification
  • 5.1 / 5.5 / 5.8 GHz ISM / UNII Band.
  • 5.8 GHz WLAN Systems.
  • Point to Pint and Point to Multi Point System.
  • Gain – 12 dBi.
  • VSWR – 2.0
Offset Satellite Dish Antenna

Product Specification
  • Support Ku-band reception & transmission of signals strongly.
  • Heavy duty Powder coated steel finish for all weather operations.
  • All metallic parts have passed 500h of salt spray resistant testing.
  • Universal mount for installation on - Ground, Wall, Roof, railing, Slope & Balustrades
  • Rolled-in edge to avoid deformation.
  • Precision degree scale stamped on AZ-EL mount for easy installation.
  • Rigid & Strong design for easy assembly & maintenance.
  • High accuracy, high gain and high efficiency to bring qualified signals.
  • Strong wind resistance to ensure its stable and excellent performance.
  • Anticorrosion to sustain anti-aging and make it durable.
  • Fashionable style and unique appearance.


Product Specification
  • Active GPS antennas include low noise amplifier
  • Three form factors: Magnetic Mount, Unpackaged, and Bulkhead
  • Various connector options
  • 3 V or 5 V supply voltage
  • Waterproof, corrosion-resistant (packaged versions only)
  • Frequency range: 1,575.42 MHz
  • Output Impedence: 50 Ω
  • LNA Noise Figure: as low as 1.5 dB @ 25 °C
  • Filtering for harsh RF jamming environments
  • RoHS-Compliant (Pb-free)
Antenna Alignment Tool

Product Specification
  • AAT is the lightest and most accurate antenna alignment tool used during equipment installation or antenna position audits.
  • AAT measures antenna alignment in azimuth, tilt, and roll while also indicating its height above ground level.
  • Eliminate costly site re-visits or re-climbs.
  • Powder-coated aluminum housing.
  • Simple to operate and can mount to any antenna.
  • Can take a reading from anyWiFi enabled device.
  • Report records the final alignment specification, including latitude/longitude, azimuth, tilt, height, and current date and time.
  • Records can be downloaded via PDF or CSV.
Outdoor Cabinet
Complete outdoor solution with IP 55 complied. Outdoor cabinet will be designed / customized as per the requirement and equipment specifications used in the network. Compact power system solution to reduce the size of the outdoor cabinet to make the system Pole mount and wall mount.
Product Specification
  • Aluminum cabinet to reduce the weight of the outdoor cabinet.
  • High degree of protection, high environment adaptability, with functions of sunscreen, waterproof, dustproof, corrosion-proof, rust-proof, against foreign invasion, wind-proof and anti-theft, with clear and reasonable structure.
  • With anti-theft device, combined with embedded structure, highly prevent burglary.
  • Green & environment friendly. With excellent filtering and shielding process, super low electromagnetic radiation.
  • Perfect surge protection performance, the product reliability and adaptability is highly improved.
  • Configured with 19"standard power rack, the rectifier is hot swappable, complete frontal operation, making the operation and maintenance safer, quicker and more convenient.
  • Perfect battery management function. With functions of temperature compensation, battery protection, charging current limit and battery capacity estimation;
  • The degree of protection of the enclosures is IP55.
2.4/5.8GHz Dual-Radio Outdoor Mesh Router & Access Point
All in one Mesh Router and Access point with two high performances Radio via patent Mesh protocol Technology. The dual-radio system serves as a WiFi access point with a dedicated 802.11a/b/g radio and as a backhaul router/repeater with a dedicated 802.11a/b/g mesh-enabled radio.
Product Specification
  • IEEE 802.11a/b/g Compliant
  • Dual-Radio Mesh Router and Access Point
  • Up to +23dBm Transmit Power with Adjustable Output
  • 5, 10, or 20MHz Channel BW
  • Wireless Fabric TM Mesh Protocol
  • Session Persistent Roaming
  • Up to 4 Virtual Access Points
  • 802.11e/WMM QoS
  • WPA2-Enterprise Security
  • NAT, PPPoE, VPN Pass-through
  • Power-over-Ethernet (PoE)
  • Omni-Directional Antennas for AP and Backhaul included
  • IP67 & NEMA Type 4X Enclosure
  • Web-based Management Tools
  • Remote Firmware Upgrade

Applications
  • Remote Data Acquisition.
  • Internet service.
  • Video Transmission.
  • Security and Surveillance
  • Private Networks
  • Wi Fi Hot spots
RF Repeaters
Complete RF digital Repeater coverage solution for High Rise and Office Towers
Stadiums & Venues
Subways and Tunnels
Airports and Transit Hubs
Railways and Highways
Scenic and Tourist Areas

Product Specification
Supported system: GSM, DCS, WCDMA and CDMA 
Supported Power Levels: 10W, 20W, 30W, 40W and 60W

  • Low power Consumption and High Linearity
  • Low Inter modulation and High Rejection
  • Low Noise Figure and High Performance
  • Compact Size and Aesthetic
  • Intelligent and Easy to Deploy and Maintain
  • Weight – 16 KG
  • Auto Configuration.
  • Auto Channel Selection.
  • Wi Fi OMT Interface.
  • Fault Self Audit

Complete solution of RF Feeder cable and Connectors
Product Specification
Splitter
Low IL & Low IMD < -150 dBc, Splitter (10 MHz – 6 GHz), From 2 to 4 Ways
Product Specification
Coupler
Low IL & Low IMD < -150 dBc , Coupler (10 MHz . 6 GHzj, Coupling 5 dB to 50 dB
Product Specification
Tower Accessories for RF Feeder Cable Laying

Product Specification
Optical Transport System.
Optical Transport Network (OTN) as a set of Optical Network Elements (ONE) connected by Optical fiber links, able to provide functionality of transport, multiplexing, switching, management, supervision and survivability of optical channels carrying client signals.
Product Specification
  • OEO6500]V is the 19]inch 5U box with 1+1 redundant power (AC/DC optional).
  • 18 slots, including 1 for control board, 2 for power supply and 15 for service boards.
  • Mixed configuration of 10 different kinds of hot]pluggable service boards
CWDM/DWDM, OEO, EDFA, optical line protection, rate multiplexing etc.. 5U box supports wavelength
conversion or optical power amplification of up to120 2.5G ports and up to 60 10G ports in full
configuration.

Maximum Insert configuration

  • Maximum insert 60 10G XFP modules and 120 2.5G/GE modules
  • Maximum insert 28 10G XFP modules and 56 2.5G/GE modules
  • Maximum insert 12 10G XFP modules and 24 2.5G/GE modules
Optical Line Protection Switch
OEO6500-OLP supports the customers to establish the high-reliability, flexible and disaster-resist optical transport network with rapid fault recovery.
OEO6500-OLP provides three types of protections via different service cards - line protection: 1:1 line protection, 1+1 line protection and BP bypass protection.
Product Specification
  • Switch the traffic in less than 20 milli seconds make no alarm in the Transmission equipments.
  • Sufficient time to send the Splicing crew for splicing.
  • Helps us to meet the SLA agreements signed with customers.
  • Fiber cut history will help us to increase customer list.
  • Continuous monitoring of Secondary media for fiber cut.
  • Same IP Address and Power Supply to manage all services cards.
  • Pizza Box – More services in box will free some old and traditional box.
  • Monthly performance report for higher authority.
  • Real time alarm details with time stamp.
  • Extend the capacity of the system by adding service cards without any additional cost.
  • EDFA Service cards will solve the issue of link budget in the network.
EDFA Cards
OEO6500‐EDFA is a kind of erbium‐doped optical fiber amplifier.

It can regenerate optical signals of multiple wavelengths without conversion.

from optical to electrical to optical, which prolongs the transmission distance.

Wavelength division multiplexing can be realized by using C/DWDM

multiplexer or de‐multiplexer, which specially applies to long‐haul

backbone network, metropolitan area network, access network as well as

various SDH/PDH transmission systems.
Product Specification
  • The gain can be adjusted if required;
  •  It is with high gain, low noise and good gain flatness;
  •  ACC, APC and AGC are optional;
  •  It supports amplification on the two stages, OADM or DCM modules can be accessed in the middle;
  •  It is with small‐size and modular design and supports hot swap;
  •  Parameters of graphical interfaces can be set and viewed.
Outdoor Cabinets
Outdoor cabinets with IP 55 complied is the best solution for all kind of outdoor telecom applications. Outdoor SMPS installed inside the cabinet will power up all the telecom equipments.
Product Specification
  • High degree of protection, high environment adaptability, with functions of sunscreen, waterproof, dustproof, corrosion‐proof, rust‐proof, against foreign invasion, wind‐proof and anti‐theft, with clear and reasonable structure.
  • With anti‐theft device, combined with embedded structure, highly prevent burglary.
  • Green & environment friendly. With excellent filtering and shielding process, super low electromagnetic radiation; Within wide load range, the power factor over 0.99, input harmonic current component below 5%, input voltage range 85~300Vac. The system noise is below 60dB.
  • High efficiency energy saving, able to operate with high efficiency at full load.
  • More reliable operation. With complete test, control, alarm and protection functions, Perfect surge protection performance, the product reliability and adaptability is highly improved.
  • Configured with 19"standard power rack, the rectifier is hot swappable, complete frontal operation, making the operation and maintenance safer, quicker and more convenient.
  • Perfect battery management function. With functions of temperature compensation, battery protection, charging current limit and battery capacity estimation;
  • CAN bus distributed digital control, intelligent network design, providing RS485/RS232 telecom port and dry contact alarm port, flexible network enables remote monitoring with unattended operation.
  • The degree of protection of the enclosures is IP55.
SFP

Product Specification
Up to 155Mb/s data links
  • FP laser transmitter and PIN photo-detector
  • Up to 20km on 9/125μm SMF
  • Hot-pluggable SFP footprint
  • Duplex LC/UPC type pluggable optical interface
  • Low power dissipation
  • Metal enclosure, for lower EMI
  • RoHS compliant and lead-free
  • Support Digital Diagnostic Monitoring interface
  • Single +3.3V power supply
  • Compliant with SFF-8472
  • Case operating temperature
  • Commercial: 0°C to +70°C
  • Extended: -10°C to +80°C
  • Industrial: -40°C to +85°C
XFP

Product Specification
  • Dual Fiber Strands XFP Modules
  • CWDM Dual Strands XFP Modules
  • C Band DWDM Dual Fiber Strands XFP Modules
  • Tunable C-Band DWDM Dual Fiber Strands XFP Module
  • Single Fiber Strand (Bi-Di) XFP Modules
  • Supports various wavelengths such as 850nm, 1310nm, 1550nm, CWDM and DWDM, and distances up to 100km for dual fiber, and 60km for single fiber
  • Compatible to major equipment vendors (Coding)
  • Digital Diagnostic Monitoring (DDM) for optical monitoring capability compliant with SFF-8472
  • Support s Normal Operating Temperature 0 to +70 degree Celsius
Media Converter
ThH.CON is a 10/100 Base‐TX to 100 Base‐FX Media Converter designed to be used as a subscriber (CPE) Access Device in FTTx Networks or normal traditional networks.
Product Specification
  • 10/100 Base -TX to 100Base-FX conversion
  • Top performance : 2000m over MM fiber, 150 KM SMF and 60 Km over Signle Fiber Strand
  • Support 1K MAC addresses
  • Supports Single Fiber Strand (15,60Km) for fiber saving
  • Supports Far End Fault for Fo link integrity indication
  • Internal AC Power Supply (optional internal DC PS)
  • ETR : Extended Temperature Range option
  • Flow Control for optimal performance
  • Desk-top, shelf or wall mount installations
Standard Compaliance

IEEE802.3/802.3u
10Base-T, 100Base-TX,100Base-FX, FDSE
FDX Flow Control, HGX back-pressure flow control
CE compliance



Complete solution of Optical Fiber cables

Product SpecificationWe are having following types of Optical Fiber Cables

  • Duct Cables.
  • Buried Cables.
  • Figure‐8 Self Supporting Aerial Cable.
  • Micro Fiber and Cables.
  • Underground Water cable.
  • Ribbon Cable.
  • FTTx Cable.
  • Slotted Cable.
  • Fire – retardant or Flame resistance cable.
  • Drop cables.
Submarine Optical Fiber Cable

Product Specification
OPLC ‐Optical Fiber Composite Low‐voltage Cable
OPLC is an integration of optical fiber cable and power cable, which transmits power flow and information flow through the same cable. It creatively combines communication optical fiber cable and power cable together to realize the dual function of terminal power supply as well as information transfer.
Product Specification
Joint Closure
All types of joint closure solution – Mechanical and Heat shrinkable type.
Ports and Splice tray capacity will be customized as per the customer requirements.
Product Specification
  • PC Material as raw material.
  • For Aerial, duct – burry, wall mounting and Pole Installation.
  • Excellent flame retardation, waterproofing, anti‐vibration and impact resistance properties.
  • Metal pieces are high profile galvanized.
Fiber Patch Cords and connectors
All type of Patch cords and connector solution
Product Specification
Fiber Distribution Panel (FDP)
All combination of FDP are available with us. FDP will be customized as per customer requirement.
Product Specification
  • Top quality steel with cover by electrostatic painted ensures the strong body and pleasing appearance;
  • Easy installations: 19” wall mounting;
  • Height: depends on capacity, normally up to 24 SC adapter within 1U height;
  • Easy operations: Drawer-type;
  • Cable inlet system provided on the rear side which has excellent performances for fixing outdoor cables;
  • Fully stable patch panel, no risk of movement;
  • Protected patch panel offers secure environment for adapters, patch cords and pigtails;
  • Adoptable adapter types: FC, SC, LC;
  • Grounding kit available;
  • Options of Splice trays & fiber management guides;
Optical Distribution Frame (ODF)
This frame is made of top quality steel and deformed aluminum alloy and treated with galvanizing, oxidation and electrostatic plastic spraying. The frame has solid structure and pleasing appearance.
Product Specification
  • This frame is made of top quality steel and deformed aluminum alloy and treated with galvanizing, oxidation and electrostatic plastic spraying. The frame has solid structure and pleasing appearance.
  • Fully-closed structure with the advantages of good performance of dust-proof, pleasing and neat appearance.
  • Enough space for fiber distribution and storage space and very easy for installation and operations.
  • Fully front side operation, convenient for maintenances.
  • Splice and distribution are separated and spread uniformly on the top and bottom sides of the frame. Compact structure and distinct layer for convenient management.
  • Frisbee style (UFO style) splice tray is adopted; up to 48 trays can be hold in one frame.
  • Curvature radius of 40mm.
  • This frame is suitable for both common bundle cables and ribbon type cables.
  • Reliable cable fixture cover and earth protection device provided.
Fiber Distribution Management System (FDMS)

Product Specification
  • This frame is made of top quality steel and deformed aluminum alloy and treated with galvanizing, oxidation and electrostatic plastic spraying. The frame has solid structure and pleasing appearance.
  • Fully-closed structure with the advantages of good performance of dust-proof, pleasing and neat appearance.
  • Enough space for fiber distribution and storage space and very easy for installation and operations.
  • Fully front side operation, convenient for maintenances.
  • Curvature radius of 40mm.
  • Cable inlet system is installed on the top of the frame which has excellent performances for fixing the cables.
  • Cables can be inlet either from the top or the bottom of the frame subject to different requirements.
  • This frame is suitable for both common bundle cables and ribbon type cables.
  • Reliable cable fixture cover and earth protection device provided.
  • Integrated splice and distribution unit is adopted. Each unit holds up to 12 FC adapters and up to 24 SC/LC adapters. All units have specially designed slots and can be easily pulled out for operation at any time.
  • Fiber separation hook of the splice and distribution module (the hook on the left) can be disassembled to fit for both wide and narrow structure frame.
FAT - Fiber Access Terminal

Product Specification
  • For fiber’s splicing, distributing and splitting.
  • Wall‐mounting or pole mounting, lock design.
  • Unattached cable access for butterfly cable and fixing fittings.
  • ABS+PC (alloy material), good anti‐aging performance with beautiful appearance.
  • Operation: smooth and easy wiring.
  • Compact structure, good dustproof property.
  • The cassette splitter can be installed inside.
  • Lifetime period: 25 years.
Optical Termination Box – OTB

Product Specification
  • For fiber’s splicing, distributing and splitting.
  • Wall-mounting or pole mounting, lock design.
  • Unattached cable access for butterfly cable and fixing fittings.
  • ABS+PC (alloy material), good anti-aging performance with beautiful appearance.
  • Operation: smooth and easy wiring.
  • Compact structure, good dustproof property.
  • The cassette splitter can be installed inside.
  • Lifetime period: 25 years.
  • Dimension: 225mm*195mm*65mm.
Home Termination Box – HTB

Product Specification
  • Support 3.0×2.0 mm‐flat drop cable, 2.0mm or 3.0mm‐circular drop cable.
  • Supports both Single and Multi Mode Patch cords.
  • Simplex SC.
  • Outlet Port – 2 No.
  • Dimension 86mm(L)X86mm(W)X25mm(H)
Industrial Standard IEC 61754‐4
Field Mountable Connector – FMC

Product Specification
  • Connect FTTH indoor cable directly, saving one pigtail and heat shrinkable tube.
  • Easy Operation, do not need any special training.
  • Insertion loss – less than 0.3 dB.
  • Return Loss – less than 55 dB.
  • Connect disconnect cycle – 500 Cycles.
  • Tensile Strength – Greater than 30 N.


Product Specification
  • PC Material as raw material.
  • For Aerial, duct – burry, wall mounting and Pole Installation.
  • Excellent flame retardation, waterproofing, anti‐vibration and impact resistance properties.
  • Metal pieces are high profile galvanized.


Product Specification
  • For Splitting function in FTTx applications.
  • Small Size and good appearance.
  • Quick installation, Reliable and Stable.
  • 0.9 mm pigtail, G657A1 Fiber.
Switch Mode Power Supply
Telecom power system uses 19"standard cabinet structure design, and can be directly installed in indoor and outdoor cabinet for use. When connected with the battery, it can provide an uninterrupted UPS power system. It meets the development trend of telecom base station, saves construction cost, shortens construction time, with wide working temperature range, and meets the demand of high level users.
Product Specification
  • AC input voltage range: 90VAC~305VAC;
  • Active power factor compensation, PF≥ 0.99;
  • Complete soft start technology;
  • Efficiency for normal module: 92%;
  • Efficiency for high efficient module: 95%;
  • Digital boost by software, boost tolerance≤ ±5%;
  • MTBF: 300,000hrs;
  • Perfect fault alarm and protection functions;
  • Working temperature: ‐40℃ ~75℃ ;
  • Accord with UL, CE standard requirements;
  • Advanced EMC design, low radiation, meet CE & FCC Class B requirements;
  • With hot‐swap technology, plug and play, replaceable easily;
  • Mandatory speed control cooling; high power density; small volume, low weight.
Rectifier

Product Specification
  • Nominal AC input:85Vac~300Vac;
  • Wide Working Temperature range:‐40 C~+85 C;
  • Active power factor correction:PF≥0.99;
  • Fan speed control design;
  • Output Power: 600 to 3000 Watts
  • Output terminal with hot plug connector.
Inverter

Product Specification
  • DC input voltage range: 40VDC~60VDC
  • Complete soft start technology, module efficiency 90%
  • Perfect fault alarm and protection functions
  • Nominal output power : 600W
  • Working temperature: ‐40􀔨~+60􀔨
  • Excellent sinusoidal output
  • With hot‐swap technology, plug and play, replaceable easily
Mandatory speed control cooling; Small volume, low weight
Controller

Product Specification
  • Front panel LCD and buttons for on‐site service without PC.
  • RS‐485 or RS‐232 interface for PC connection locally or remote monitoring and control via modem.
  • 4 user programmable relay outputs for tradition remote monitoring
  • Battery monitoring and testing without site attendance
  • Password protected operator access levels
  • Alarm/event log with time and date
  • Windows‐based PC communication software

48V Lithium Battery Pack for Tele Communication
Product Specification

With the increasing demand for network, the operators’ demand for network development and coverage also increase. More and more outdoor base station building expands from limit network to urban area, road etc., the telecom pressure of some areas is relieved. In the meantime, the broadband speed‐up of wired network brings the expansion of access network, and large amount of building demand of outdoor stations. WG series small sized wall‐mounted power system is designed for outdoor low power telecom power supply market, which is a new generation “Green Energy‐Saving” power system.
Product Specification
  • AC input voltage range: 90VAC~305VAC;
  • Active power factor compensation, PF≥ 0.99;
  • Efficiency for normal module: 92%;
  • Efficiency for high efficient module: 95%;
  • AC harmonic current distortion≤5%;
  • Working temperature: ‐40℃ ~75℃ ;
  • Air cooling is used for the cabinet, the protection degree of shelf is IP45;
  • Accord with UL, CE standard requirements;
  • Advanced EMC design, low radiation, meet CE & FCC Class B requirements;
  • With high degree of protection and environmental adaptability, the cabinet is sunscreen, waterproof, dust‐proof, anti‐corrosion, rust‐proof, foreign objects preventive, wind‐proof, antitheft and etc.;
  • Reliable operation with full system status detection, control, alarm and protection functions, especially perfect surge protection;
  • All positive interface operation, plug and play, which makes the operation and maintenance more safe, convenient and fast;
  • Perfect battery management functions, has the temperature compensation, battery protection, charging current limit and battery capacity calculation functions;
  • CAN bus distributed digital control, intelligent internet monitoring design, providing a variety of communication interfaces such as RS‐232, RS‐485, TCP/IP telecom and dry contact alarm interface, flexible networking, remote monitoring, unattended.
HIGH FREQUENCY LITHIUM BATTERY CHARGER (48V, 30A for Lithium Battery)

Product Specification
  • Easy operation. One button press for automatic charging or stop relieves the trouble of setting up and risk of setup errors.
  • Quality electronic components ensure reliability and durability
  • Electronic Board coated with water resist and anti-salt fog varnish.
  • Automatic Charging according to CC/CV mode.
  • 100% tested in the factory before shipment.
  • Each unit traceable against the exclusive code.
  • Elegant looking and portable.
RY-PM300
RY-PM300 Handheld Optical Power Meter is a newly designed fiber optic tester, which aims at the installation, engineering acceptance and maintenance of fiber network. Combined with RY-LS300 handheld optical light source, it offers a quick and accurate testing solution on both SM and MM fibers.
Product Specification


Scroll To Top